How Is The Machine Transported — Machine-Before Example for Public Works

Machine Before - Dugong - Machine After

The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.

Before moving material

Identify the upstream operation and its remaining defects.

Receiving operation and checks

Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.

The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.

Councils & Public Works

Council and public works briefs should state the asset outcome, scope boundaries and evidence needed for acceptance. Naming a machine too early can obscure whether the work requires design, bulk excavation or surface correction.

Before moving material

Identify the asset owner, procurement brief and work-zone controls.

Receiving operation and checks

Record the verified result and any work outside the contractor's scope. Check that the completed work answers the brief rather than a machine-based promise.

No council endorsement, supplier approval or procurement status is implied.

Weight That Works

Working weight influences cutting, traction and ground loading, but weight alone does not establish grading performance. Ballast, a carried load and attachment weight also change the demands on the tractor, hitch and tyres. Consider the complete combination in both loaded and empty states.

Before moving material

Obtain the machine weights, hitch limits and tractor information.

Receiving operation and checks

Use a controlled trial to establish a workable pass depth. Observe slipping, rutting and unstable handling before chasing greater load.

More weight may damage soft ground and does not make a machine suitable for every tractor.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology