Gps Compatibility — Inspection Evidence
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
What Verification Evidence Proves
Verification evidence should answer the acceptance question asked. Elevation measurements establish geometry; material records and relevant tests address layer condition. Neither should be silently substituted for the other.
Before moving material
Define the checks needed for the finished purpose.
Receiving operation and checks
Hand over accepted areas and clearly identify exceptions. Check that the evidence concerns the same layer and work zone.
An instrument display is not a complete acceptance record.
Read the complete What Verification Evidence Proves guideGPS Land Grading
GPS-based grading uses positioning information in relation to a design or reference surface. Ordinary navigation positioning should not be treated as a precision earthworks control system.
Before moving material
Identify the positioning equipment, corrections and design requirements.
Receiving operation and checks
Verify the achieved surface separately. Record correction status and any loss of usable positioning during work.
A satellite receiver alone does not establish vertical grading accuracy.
Read the complete GPS Land Grading guideTractor GPS Grading
A tractor used for GPS grading needs both a suitable implement combination and a functioning positioning workflow. The tractor's navigation system may not control the scraper's grading function.
Before moving material
Identify tractor, implement and proposed guidance equipment.
Receiving operation and checks
Verify both tractor tracking and resulting grade. Check the cutting-edge reference rather than assuming the tractor antenna represents the surface.
Autosteer compatibility is not the same as implement grade-control compatibility.
Read the complete Tractor GPS Grading guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group