Operating Weight — Survey Evidence

What Verification Evidence Proves

Verification evidence should answer the acceptance question asked. Elevation measurements establish geometry; material records and relevant tests address layer condition. Neither should be silently substituted for the other.

Before moving material

Define the checks needed for the finished purpose.

Receiving operation and checks

Hand over accepted areas and clearly identify exceptions. Check that the evidence concerns the same layer and work zone.

An instrument display is not a complete acceptance record.

Weight That Works

Working weight influences cutting, traction and ground loading, but weight alone does not establish grading performance. Ballast, a carried load and attachment weight also change the demands on the tractor, hitch and tyres. Consider the complete combination in both loaded and empty states.

Before moving material

Obtain the machine weights, hitch limits and tractor information.

Receiving operation and checks

Use a controlled trial to establish a workable pass depth. Observe slipping, rutting and unstable handling before chasing greater load.

More weight may damage soft ground and does not make a machine suitable for every tractor.

Surveying for Land Grading

Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.

Before moving material

Define the survey area, control and required deliverables.

Receiving operation and checks

Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.

A topographic survey and a legal boundary survey serve different purposes.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology