Restore Longitudinal Fall — Existing Condition

Incorrect Fall

Fall is the change in elevation along a defined direction. An incorrect fall can include a reversal, an insufficient gradient or a gradient that differs from the design.

Before moving material

Identify the start and end points, distance and elevation reference.

Receiving operation and checks

Measure the corrected profile independently. Check intermediate points because correct end levels can still hide a local dip.

There is no universal drainage fall appropriate to every project.

Existing-Surface Survey

An existing-surface survey records what is present before soil moves. Omitting a drain edge, bank or abrupt grade change can distort the volume model even when point readings are correct.

Before moving material

Identify the work extent and important surface features.

Receiving operation and checks

Compare the surveyed surface with the proposed design. Inspect coverage and gaps rather than relying only on a coloured map.

Survey spacing must reflect terrain and required precision, not a universal grid size.

Survey Existing Ground

Surveying existing ground is the first project-stage record of the surface to be changed. Agree the coverage before the survey so critical features are not omitted.

Before moving material

Define boundaries of work, reference control and required detail.

Receiving operation and checks

Issue the survey with datum, units and limitations stated. Check control-point agreement and representation of abrupt terrain changes.

A survey deliverable should not be confused with a legal boundary determination.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology