Hard Spots — Material Checks
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
High Spots
A high spot is meaningful only relative to the intended surface. It may obstruct runoff, limit cultivation depth or sit above a construction formation. Cutting it without knowing the target can remove useful soil unnecessarily.
Before moving material
Measure the feature against surrounding levels and the agreed datum.
Receiving operation and checks
Recheck the corrected level and restore the appropriate surface layer. Check whether the high spot was a local deposit or part of the intended contour.
A visible mound is not automatically a defect.
Read the complete High Spots guideLow Spots
A low spot may be a true grade deficit, settlement over weak ground or part of a designed drain. The cause determines whether filling is appropriate.
Before moving material
Compare surface levels with the intended drainage path.
Receiving operation and checks
Compact or prepare the repaired material for its next use. Check the repair against adjacent levels and observe whether water still collects.
Repeated settlement needs investigation rather than repeated surface filling.
Read the complete Low Spots guideHard Ground
Hard ground is an operating condition that may limit cutting and traction. It does not justify forcing a deeper pass with an unsuitable tractor or implement.
Before moving material
Identify the material, moisture and buried-obstruction risk.
Receiving operation and checks
Grade the loosened workable material and check the resulting layer. Observe traction, blade response and whether the intended soil layer is being disturbed.
Rock, cemented material or deep excavation may need entirely different plant.
Read the complete Hard Ground guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group