Settlement — Gnss Survey Diagnosis
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Repeated Settlement Diagnosis
Repeated settlement suggests the problem may lie below the visible surface. Filling a depression again can hide a weak or poorly prepared layer.
Before moving material
Record the timing and extent of movement and review material history.
Receiving operation and checks
Repair the confirmed cause and re-establish the intended layers. Monitor the repaired area under the intended use.
A scraper guide cannot diagnose geotechnical failure from a photograph.
Read the complete Repeated Settlement Diagnosis guideSurveying for Land Grading
Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.
Before moving material
Define the survey area, control and required deliverables.
Receiving operation and checks
Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.
A topographic survey and a legal boundary survey serve different purposes.
Read the complete Surveying for Land Grading guideExisting-Surface Survey
An existing-surface survey records what is present before soil moves. Omitting a drain edge, bank or abrupt grade change can distort the volume model even when point readings are correct.
Before moving material
Identify the work extent and important surface features.
Receiving operation and checks
Compare the surveyed surface with the proposed design. Inspect coverage and gaps rather than relying only on a coloured map.
Survey spacing must reflect terrain and required precision, not a universal grid size.
Read the complete Existing-Surface Survey guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group