Dairy Facility — Correcting Potholes

Potholes

A pothole can be a local surface failure or evidence of water and weak support below. The repair method should match its depth and cause.

Before moving material

Inspect the surrounding layer and water entry route.

Receiving operation and checks

Compact the repair and inspect the transition to the existing surface. Check that water is not trapped at the repair edge.

Simply pushing loose soil into a road pothole is not a durable pavement repair.

High Spots

A high spot is meaningful only relative to the intended surface. It may obstruct runoff, limit cultivation depth or sit above a construction formation. Cutting it without knowing the target can remove useful soil unnecessarily.

Before moving material

Measure the feature against surrounding levels and the agreed datum.

Receiving operation and checks

Recheck the corrected level and restore the appropriate surface layer. Check whether the high spot was a local deposit or part of the intended contour.

A visible mound is not automatically a defect.

Low Spots

A low spot may be a true grade deficit, settlement over weak ground or part of a designed drain. The cause determines whether filling is appropriate.

Before moving material

Compare surface levels with the intended drainage path.

Receiving operation and checks

Compact or prepare the repaired material for its next use. Check the repair against adjacent levels and observe whether water still collects.

Repeated settlement needs investigation rather than repeated surface filling.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology