Market Garden — Subgrade Condition
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Market Garden Landforming
Market-garden landforming should support the chosen bed system, water arrangement and repeated small-area traffic. Plan changes before the beds and services are established.
Before moving material
Record bed layout, productive-layer depth and drainage outlets.
Receiving operation and checks
Complete planting preparation and irrigation installation. Check access and bed-end connections.
Do not assume every market garden uses the same bed geometry or irrigation method.
Read the complete Market Garden Landforming guideUneven Subgrade
Uneven subgrade can create variable thickness in every layer above it. Correcting the surface is useful only if the underlying support is acceptable.
Before moving material
Identify soft areas and compare formation levels with design.
Receiving operation and checks
Complete compaction and specified acceptance checks. Check levels before base material conceals the subgrade.
A scraper does not replace proof testing or project-specific investigation.
Read the complete Uneven Subgrade guideHow to Prepare Subgrade for Road Base
Before road base is placed, the subgrade should be accepted for both level and condition. An uneven or weak supporting surface can lead to thickness variation and premature failure above it.
Before moving material
Confirm formation level and identify unaccepted areas.
Receiving operation and checks
Inspect and accept before spreading base aggregate. Record level and material checks for the same work area.
Adding more base material is not automatically a remedy for weak subgrade.
Read the complete How to Prepare Subgrade for Road Base guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group