Shed Pad — Survey Verification

Building Pad Surface Handover

A building-pad handover must identify the formation, level reference and evidence for the intended foundation work. Geometry and material suitability are separate acceptance questions.

Before moving material

Obtain the structural and civil requirements for the pad.

Receiving operation and checks

Provide the builder with accepted level and material records. Check thresholds and surrounding runoff as well as the pad surface.

This guide does not establish bearing capacity or certify engineered fill.

What Verification Evidence Proves

Verification evidence should answer the acceptance question asked. Elevation measurements establish geometry; material records and relevant tests address layer condition. Neither should be silently substituted for the other.

Before moving material

Define the checks needed for the finished purpose.

Receiving operation and checks

Hand over accepted areas and clearly identify exceptions. Check that the evidence concerns the same layer and work zone.

An instrument display is not a complete acceptance record.

Shed Pad Preparation

A shed pad must support its intended use and remain connected to access and drainage. Light storage, vehicle use and other activities can require different formation and material decisions.

Before moving material

Confirm shed layout, floor level, access loads and services.

Receiving operation and checks

Complete compaction and the shed builder's required checks. Inspect transitions at doorways and runoff routes beside the pad.

The machine selection does not establish structural suitability.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology