Uneven Subgrade — Road Base Placement
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
How to Prepare Subgrade for Road Base
Before road base is placed, the subgrade should be accepted for both level and condition. An uneven or weak supporting surface can lead to thickness variation and premature failure above it.
Before moving material
Confirm formation level and identify unaccepted areas.
Receiving operation and checks
Inspect and accept before spreading base aggregate. Record level and material checks for the same work area.
Adding more base material is not automatically a remedy for weak subgrade.
Read the complete How to Prepare Subgrade for Road Base guideUneven Subgrade
Uneven subgrade can create variable thickness in every layer above it. Correcting the surface is useful only if the underlying support is acceptable.
Before moving material
Identify soft areas and compare formation levels with design.
Receiving operation and checks
Complete compaction and specified acceptance checks. Check levels before base material conceals the subgrade.
A scraper does not replace proof testing or project-specific investigation.
Read the complete Uneven Subgrade guideRoad Surface Handover
A road-surface handover should identify the layer being accepted and the next paving or traffic operation. A base-layer check and a wearing-surface check are not interchangeable.
Before moving material
Confirm layer specification, alignment and receiving operation.
Receiving operation and checks
Release the accepted layer to surfacing or the intended use. Check edges, junctions and drainage connections.
The design sets applicable tolerances; the machine brand does not.
Read the complete Road Surface Handover guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group