Rehabilitation Works — Equipment Implications

Weight That Works

Working weight influences cutting, traction and ground loading, but weight alone does not establish grading performance. Ballast, a carried load and attachment weight also change the demands on the tractor, hitch and tyres. Consider the complete combination in both loaded and empty states.

Before moving material

Obtain the machine weights, hitch limits and tractor information.

Receiving operation and checks

Use a controlled trial to establish a workable pass depth. Observe slipping, rutting and unstable handling before chasing greater load.

More weight may damage soft ground and does not make a machine suitable for every tractor.

Rough Earthworks

Rough earthworks may still contain broad quantity errors, loose fill and unresolved drainage. Fine trimming should begin only after the larger formation is understood.

Before moving material

Survey the bulk surface and identify unsuitable or unaccepted areas.

Receiving operation and checks

Verify the corrected formation before the next layer. Check areas where bulk machines turned, stockpiled or discharged material.

A finish pass cannot establish the suitability of buried fill.

Earthworks Design

Earthworks design compares existing terrain with the intended surface and accounts for material movement. It must also consider where the resulting water and traffic will go.

Before moving material

Obtain a suitable survey and identify constraints.

Receiving operation and checks

Issue the approved revision and construction checks. Review critical connections and quantity assumptions.

Geometric balance does not establish usable material balance or structural design.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology