Ord River Irrigation Area — Irrigation Development
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Poor Irrigation Surface
An irrigation surface can be poor because of inlet mismatch, local depressions or altered field grade. The correction should follow water observations and measured levels.
Before moving material
Record water movement and survey supply, outlet and field features.
Receiving operation and checks
Recheck levels and observe the next controlled irrigation. Check corners, row ends and the far end of the field.
Grading alone cannot correct an unsuitable water-delivery arrangement.
Read the complete Poor Irrigation Surface guideIrrigation Grade Design
Irrigation grade design starts with the method of applying water and the field's soil and supply conditions. Minimising unnecessary soil movement is one consideration alongside water distribution.
Before moving material
Survey the field with inlet and outlet structures.
Receiving operation and checks
Check the formed field and its operating behaviour. Record levels and water observations together.
A single published slope cannot replace site-specific irrigation design.
Read the complete Irrigation Grade Design guideArea and Depth Volume Calculator
An area-and-depth volume estimate is useful for a uniform layer. Length multiplied by width multiplied by average depth gives geometric volume; irregular terrain needs more detailed measurement.
Before moving material
Confirm dimensions and the volume state used.
Receiving operation and checks
Reconcile the estimate with material suitability and placement requirements. For example, 100 by 300 metres at an average 0.01 metre change gives 300 cubic metres.
That example does not establish the volume caused by changing an entire bay's slope.
Read the complete Area and Depth Volume Calculator guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group