Crushed Rock — Field Workflow
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Crushed-Rock Preparation
Crushed-rock preparation concerns a specified material layer. Its grading, moisture and compaction requirements belong to the project brief, not merely the machine placing it.
Before moving material
Confirm material documents and supporting-layer acceptance.
Receiving operation and checks
Complete the specified testing and surface acceptance. Check material uniformity and layer depth.
A scraper's capacity cannot establish the compacted thickness achieved.
Read the complete Crushed-Rock Preparation guideSports Field Preparation
Sports-field preparation combines play-surface design with drainage and layer control. The required profile may include deliberate gradients rather than a perfectly horizontal plane.
Before moving material
Confirm the venue design and the sequence of drainage and surface construction.
Receiving operation and checks
Hand over to drainage checks, turf preparation and venue inspection. Measure levels independently of the machine's guidance display.
Do not advertise standards compliance without the applicable specification and evidence.
Read the complete Sports Field Preparation guideExcavator to Grading Workflow
An excavator can open ground, remove unsuitable material and work below surrounding level. The grading handover begins when accessible material and formation are ready for controlled redistribution.
Before moving material
Agree excavation limits and the formation reference.
Receiving operation and checks
Compact, survey or place the next layer as specified. Check trench edges, disturbed areas and remaining excavation defects.
A scraper is not a substitute for an excavator's digging or lifting functions.
Read the complete Excavator to Grading Workflow guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group