Find Your Land Problem

Global Land Grading Knowledge Centre

The knowledge centre connects four decisions: the finished purpose, the problem stopping it, the work needed to correct it, and the equipment that can perform that work. Start with the symptom or project rather than a machine name when the cause is uncertain.

Before moving material

Choose a design, application or equipment pathway.

Receiving operation and checks

Take a clear project brief to the person arranging design or rental. Compare the selected guide with the actual site conditions.

Country or town names do not establish a local branch, completed project or available rental machine.

How Far Does Your Dirt Need to Move?

Haul distance is the distance material must travel from a cut to its actual receiving area. Straight-line map distance can understate the cycle when access, turns and unloading routes matter. Longer hauls increase travel time even when loading capacity is unchanged.

Before moving material

Locate cut and fill areas and inspect the permitted traffic route.

Receiving operation and checks

Choose local balancing, staged stockpiles or another haul method where the route demands it. Use a timed trial with realistic loads and ground conditions.

A theoretical loads-per-hour figure is an operating assumption, not a guaranteed production rate.

Surveying for Land Grading

Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.

Before moving material

Define the survey area, control and required deliverables.

Receiving operation and checks

Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.

A topographic survey and a legal boundary survey serve different purposes.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology