Land Grading for Councils
Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
Global Land Grading Knowledge Centre
The knowledge centre connects four decisions: the finished purpose, the problem stopping it, the work needed to correct it, and the equipment that can perform that work. Start with the symptom or project rather than a machine name when the cause is uncertain.
Before moving material
Choose a design, application or equipment pathway.
Receiving operation and checks
Take a clear project brief to the person arranging design or rental. Compare the selected guide with the actual site conditions.
Country or town names do not establish a local branch, completed project or available rental machine.
Read the complete Global Land Grading Knowledge Centre guideSurveying for Land Grading
Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.
Before moving material
Define the survey area, control and required deliverables.
Receiving operation and checks
Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.
A topographic survey and a legal boundary survey serve different purposes.
Read the complete Surveying for Land Grading guideHow to Establish Fall Across Land
Fall across land is established by relating target elevations to measured horizontal distances. Set the required direction before choosing a gradient or moving soil.
Before moving material
Identify start, end and intermediate controls.
Receiving operation and checks
Measure the constructed surface independently. Check intermediate points and receiving outlets.
The example calculations on this site illustrate geometry, not universal design slopes.
Read the complete How to Establish Fall Across Land guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group