Survey & Verify

Define the finished purpose, reference levels, underlying material condition and the evidence required by the receiving operation. Geometry alone does not establish structural or agronomic performance.

This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.

Survey & Verify

Survey and verification compares the delivered surface with the brief before it is covered by the next layer. It should establish both compliant areas and defects.

Before moving material

Agree the acceptance method and reference.

Receiving operation and checks

Record accepted work and required corrections. Check the issued design revision and datum used for comparison.

A level survey cannot prove compaction, and a density test cannot prove grade.

Read the complete Survey & Verify guide

Survey Existing Ground

Surveying existing ground is the first project-stage record of the surface to be changed. Agree the coverage before the survey so critical features are not omitted.

Before moving material

Define boundaries of work, reference control and required detail.

Receiving operation and checks

Issue the survey with datum, units and limitations stated. Check control-point agreement and representation of abrupt terrain changes.

A survey deliverable should not be confused with a legal boundary determination.

Read the complete Survey Existing Ground guide

Design - Measure - Move - Verify

Design, measure, move and verify is a closed loop. The verification step tests whether the movement achieved the design rather than merely whether the operator followed a display.

Before moving material

Issue an agreed surface design and reliable control.

Receiving operation and checks

Correct residual defects and record acceptance before the next operation. Use independent observations for the final check.

Do not treat production guidance and acceptance evidence as the same record.

Read the complete Design - Measure - Move - Verify guide

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

Existing condition, extent and the reason for intervention
Required finished purpose, receiving operation and acceptance criteria
Material type, layer role, source, receiving area and volume state
Reference levels, datum, survey method and issued design revision
Available tractor, implement configuration, travel route and turning space
Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Prepare a project enquiry

Continue through the network

Surface and verification · Applications and rental · Equipment and technology

Return to this reference group